Our verge caps can be used to cover the exposed, pitched edge of a roof conversion. This ensures that water does not run under the tiles and finishes the roof off nicely. These verge caps are coloured in a textured barley straw.
Verge caps are available in two types (either left or right), you need to ensure you use the correct side of cap when fitting.
A single verge cap covers 0.94 linear meters, (so if you need 3 meters you should ideally buy 4). This approximately equates to one verge cap required for every three Lightweight Tiles.
GRANULATED VERGE DIMENSIONS
Overall Length: 1110mm
Usable surface: 940mm
Width: 107mm
Height: 120mm
