The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs.

More and more we have customers ask us "what do your customers do to finish the internal look of their conservatory?" 

 

Below you will see some images from our customers and what they have done to complete to renovation of their conservatory roofs. 

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The above images are a tongue and groove option. Finished with lighting.

 

Other customers have applied ply wood with insulation. 

 

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The above image has used a panel finish with spot lights.

THERE ARE MANY OPTIONS YOU CAN USE AND IF YOU HAVE ANY THAT YOU THINK WOULD BE HELPFUL TO OTHER CUSTOMERS WE WOULD BE MOST GRATEFUL FOR THESE IMAGES OR TIPS :) 

Here are a few images recently sent in to us by our latest approved installer to show us how he finished the inside of look of the conservatory roof he worked on. 

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

As you can see from the below images the little spot lights inside the conservatory really complete the finished internal look. It makes it more modern. And still you have got natural lighting coming into your conservatory. So, when the sun is shining you can still sit in your conservatory and enjoy the sunshine without the sun blinding you. 

There are a variety of ways you can complete the internal look of your conservatory.

Below, are a couple more images where our approved installer has insulated the inside of the conservatory and then plastered over the top of the insulation fixing the plaster to the battens and then you can give it a coat of paint. They have then has used little spot lights to complete the look.

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

The finished internal look for LightWeight Tiles conservatory roofs

I had to increase the pitch as it was insufficient for water to run off of the tiles, I built a rise of additional 15 degrees onto the small pitch already on the triple walled roof. This was taking the front edge to rise to 200mm at the back, then flasbanded and bonded to the roof tile. The customer found that the conservatory wasn't useful to them before and this has made it into a additional room, with a bed settee as a guest room. The customer was absolutely thrilled with the transformation, and I was pleased with a trouble free installation.

- Mr Sharp , Morecambe

Back to Top