Quality British made lightweight roofing tiles for DIY roofing or trade

“ Thank you for all your help. I’ve put a photo below, of the completed work. ”

- T Grant , Liverpool

“ I just wanted to say how good your product was when I used it recently .
I took down an old wooden conservatory and replaced it with a brick one that had a wooden roof . The front of the conservatory roof sat on a wall plate on top of the French door frame and I didn’t want the weight of concrete tiles on top of that,so I researched and found your product.
The videos of how the product was made and installed and how durable they were was a deciding factor in me choosing yourself over other similar product I had seen.
I have to say the service from the lady who took the order to the prompt delivery was 1st class and friendly , and the price was a lot less than I had thought was going to be .
The product itself was top quality and installation was as simple as it could be with everything fitting together without any problems and the verge trims finished it off fantastically and all the people who have seen it have commented on how good it looks .
I have been a building site manager for 25 years plus so have a good idea of things and how they should work and I have to say I wouldn’t hesitate to recommend or use your product again.
So well done for developing such a great product and wishing your company every success in the future.

Many thanks ”

- Kevin , Hinckley

“ I have a general building and carpentry background, but I will say that your products are very easy to use and with a bit of forward planning, it was easier than I thought. I think I was quite fortunate how the tiles worked out at the ridge but would have been fine if I would have had to of cut them, as your ridge tile gives great cover.
The room was once a separate conservatory, but as with a lot of households now, I had knocked out the back of the house and the wall of the kitchen to make one big entertainment area. The roof was then the biggest loss of heat in the winter. 25mm Celotex insulation was just stuck onto the outside face of the existing polycarb roof, between the roof bars and then felt and battened. As for the Velux, the interaction with your tiles, as opposed to a ‘normal’ traditional tile, was a little interesting. Your tile sits below the front edge of the battens and ‘normal’ tile hooks over the back of it meaning the tile line does rise a little at this point to accommodate the flashing kit but is not too noticeable.
The beauty of doing it this way, was the fact that the existing roof gave great weather proofing. As I never compromised it, apart from taking out the existing vent openers.
I intend now to stick another layer of 25mm Celotex in-between the roof bars on the inside and then plasterboard and skim to give it a vaulted ceiling look. I will send you a picture of this, if you wish, later in the year. ”

- Mike Palmer Palmer Property Maintenance, Bristol

“ 5 years ago I purchased your product for a similar conversion and the customer continues to be delighted with the end result using the conservatory 12 months of the year. ”

- Rookewood Joinery , Bury St. Edmunds