Quality British made lightweight roofing tiles for DIY roofing or trade. Not only are our lightweight roofing tiles very light and strong, but they are also simple to fit on a wide range of roofs. Our lightweight tiles are easy to saw and cut and with just some batons, a drill, a screwdriver and a handful of screws, you can completely renew your roof in just a couple of hours.
We manufacture and distribute our own low pitch roofing products (recommended for roof pitches of 10º and above) to the highest standard, and pride ourselves on our attention to detail. Our recycled roofing tiles are made here in the UK by our family run business, and we have been producing and distributing our roofing system for many years throughout the UK and Europe.
Our lightweight roofing tiles are made from a mix of a top blended quality virgin polypropylene and recycled polypropylene, they can also be recycled, making them a brilliant, eco-friendly option. All our tiles are guaranteed for 25 years.
“ I have a general building and carpentry background, but I will say that your products are very easy to use and with a bit of forward planning, it was easier than I thought. I think I was quite fortunate how the tiles worked out at the ridge but would have been fine if I would have had to of cut them, as your ridge tile gives great cover.
The room was once a separate conservatory, but as with a lot of households now, I had knocked out the back of the house and the wall of the kitchen to make one big entertainment area. The roof was then the biggest loss of heat in the winter. 25mm Celotex insulation was just stuck onto the outside face of the existing polycarb roof, between the roof bars and then felt and battened. As for the Velux, the interaction with your tiles, as opposed to a ‘normal’ traditional tile, was a little interesting. Your tile sits below the front edge of the battens and ‘normal’ tile hooks over the back of it meaning the tile line does rise a little at this point to accommodate the flashing kit but is not too noticeable.
The beauty of doing it this way, was the fact that the existing roof gave great weather proofing. As I never compromised it, apart from taking out the existing vent openers.
I intend now to stick another layer of 25mm Celotex in-between the roof bars on the inside and then plasterboard and skim to give it a vaulted ceiling look. I will send you a picture of this, if you wish, later in the year. ”
- Mike Palmer Palmer Property Maintenance, Bristol
“ Good morning. Please find attached photos as promised. Prior to retailing the conservatory roof I insulated, boarded and plastered the inside. After completing the roof the transformation is amazing. Thank you very much for a superb product and the help and advice given by your staff. Everyone who has seen the new roof are very complimentary on the finish and new look. I would have no hesitation in recommending your company to anyone. ”
- Ian Gaunt , Cleethorpes
“ Overall pleased with the result, a very serviceable roof which looks good. ”
- Customer
“ Thank you for all your help. I’ve put a photo below, of the completed work. ”
- T Grant , Liverpool
Installation Tip Videos for Our Lightweight Roof Tiles
Take a look at some of our YouTube Installation Tip Videos. . .
View our Customers' Completed Roof Catalogues
Click on the Image to Take a look at a small selection of Granulated Roofs…
We have recently been having our granulated and smooth lightweight roofing …
How to do a conservatory roof conversion
As a manufacturer and supplier of Lightweight Tiles, which are brilliant fo…
“ Good Morning,
Thought I would send photos of our DIY roof conversion; thank you for the instructions. ”
- Charlotte L , Nottingham