Barley Straw Granulated Roof Tiles » Barley Straw Granulated Ridge Tile
£6.25 Excludes VAT
These lightweight, ridge tiles are designed to cover the ridge of your roof conversion. One ridge tile covers 0.36 metres in length (so for 1 meter or one Lightweight Tile you will need 3 ridge tiles). These tiles are finished in a textured barley straw colour and boast the following features:
Usable surface: 360mm
The ridge tiles are fixed to the ridge or hips of your Lightweight Roof with screws, either into a central batten or directly into the top of the tiles underneath. See our Installation Guidelines for more details.
“ This old building in our garden is known to us as the Ranch House. It is known to be at least 75 years old and may well be more. The roof in particular was falling apart, it was covered in corrugated bitumen sheeting which was well past its used by date. We had two choices; demolish it or renovate it. We decided to renovate but felt that it deserved something better than corrugated sheeting on the roof. This was why we selected Lightweight Tiles after several email exchanges with Laura and Susan plus going to meet Laura at the Renovation Show in Birmingham.
The hard part was completely rebuilding the roof structure as we decided to change the pitch of the roof. Fitting the tiles was easy. Two of us fitted 70 tiles on the long side in 5 hours which included a leisurely lunch and several cups of tea. I fitted the remaining 30 on the other side on my own in about the same time. I have one tip though, it is worth drilling a small pilot hole for each screw, you can then fit the screws much more neatly.
We are very pleased with the transformation, I keep going down the garden to look at it!”
- Bob S , Cheltenham